Independent Recording Horizontal Autoclave With Multiple Access
Levels And User Passwords
Specification
This Horizontal Autoclave is designed to service hospitals and
large medical centers that need to process high volumes of medical
waste safely and on site.
Designed and manufactured according to ISO 9001, ISO 13485 system
and latest moist steam sterilizer related standards, which has the
obvious advantage of low failure rate and easily operation to
ensure your satisfied using smoothly.
Features
• Horizontal square chamber of high corrosion resistant SUS316 for
medical waste being treated safely.
• Automatic vertical sliding door system easy and safe operation
• Pre-vacuum air stream sterilization to ensure medical waste
thoroughly treated on site.
• Optional advanced control system with touch screen control
• HEPA air filter to ensure the safety both human and environment.
• HEPA air filter sterilization in place is optimized selection for
safety.
• Removable soft temperature sensor is the best sterilization
solution for liquid medical waste.
Control System
This Hospital Sterilizer features Mitsubishi PLC with enhanced
functionality and user-friendly interface screen.
• Touch-screen with 800 x 480 display resolution
• Ink-on-paper impact printer
• Help screens for programming and trouble shooting alarm
conditions
• Automatic check of control program and cycle data maintains
process integrity
• Individual digital data recorder for sterilization data storage.
• High precise temperature sensor and pressure transmitter to
ensure the PLC control accurately and total sterilization
effectiveness.
• Double sensors at the same point for PLC control and individual
recorder monitoring to ensure the sterilization performance of
reliable and repeatable.
Steam Generator
- This sterilizer equipped with an electric steam generator includes
an automatic water-in, electric heating and drain controlled by
PLC.
- Steam generator vessel of SUS304 and electric heating element of
SUS304 to ensure the clean steam supply.
- Steam generator of full SUS316L is optional for your upgraded
selection.
Loading/Unloading System
Standards equipped: 1 piece loading cart of SUS316L, 2 pieces
trolley of SUS304
Loading plate, racks or shelves are available for option.
All loading/unloading system features of,
• High capacity for maximum throughput
• Eliminates operator handling of hot loads
• Swivel casters for easy maneuverability
• Low profie docking mechanism for easy alignment
• Racks and shelves for selected chamber sizes
Main Parameters
Model | MD-0.6V |
Door type | Vertical sliding single door |
Max working pressure | 0.23Mpa |
Working vacuum degree | <-0.086Mpa |
Max working temperature | 134℃ |
Chamber size | 1670*600*600 mm(L*W*H) |
External dimension | 2010*1350*1800mm(L*W*H) |
Net weight | 1200Kg |
Utilities Supply |
Electric power | AC380V, 50Hz, 3Ph/N/E,39KVA |
Water | 0.15---0.3MPa, Hardness<50ppm, pH Neutral, 85Kg/cycle |
Compressed air | 0.5～0.7Mpa, 10 liters/minute |
Brochure load down from here
Medpharm medical large steam autoclave brochure.pdf
